Temperature Evolution of Sorbonorit-4 Methane-Induced Deformation through the Eyes of Classical Density Functional Theory.

Activated carbons are widely used industrial adsorbents due to their attractive sorption properties. Although extensive research on activated carbon has been carried out for several centuries, some aspects of the adsorption-induced deformation of activated carbon remain unclear. The puzzling temperature dependence of the methane-induced deformation of activated carbon is investigated in the present work. Several experimental studies have shown that an increase in temperature leads to a reversal of the sign of adsorption strain at low pressures, i.e., the contraction turns into an expansion. Here we suggest a possible explanation for this effect by applying classical density functional theory to the adsorption isotherms of nitrogen, carbon dioxide, and methane as well as to methane-induced deformation isotherms. Our calculations show that the adsorption stress generated in the smallest pores predominates at higher temperatures and leads to material swelling. Lowering the temperature, on the other hand, leads to a predominance of larger pores and compression of the activated carbon material. We also investigated the possibility of determining the pore size distribution from methane-induced deformation and adsorption data and the predictive capabilities of our theoretical approach.

Closer Look at Adsorption of Sarin and Simulants on Metal-Organic Frameworks.

The development of effective protection against exposure to chemical warfare agents (CWAs), such as sarin, relies on studies of its adsorption on the capturing materials and seeking candidates capable of adsorbing large amounts of sarin gas. Many metal-organic frameworks (MOFs) are promising materials for the effective capture and degradation of sarin and simulant substances. Among the simulants capable of mimicking thermodynamic properties of the agent, not all of them have been investigated on the ability to act similarly in the adsorption process, in particular, whether the agent and a simulant have similar mechanisms of binding to the MOF surface. Molecular simulation studies not only provide a safe way to investigate the aforementioned processes but can also help reveal the mechanisms of interactions between the adsorbents and the adsorbing compounds at the molecular level. We performed Monte Carlo simulations of the adsorption of sarin and three simulants, dimethyl methylphosphonate (DMMP), diisopropyl methylphosphonate (DIMP), and diisopropyl fluorophosphate (DIFP), on selected MOFs that have previously shown strong capabilities to adsorb sarin. On the basis of the calculated adsorption isotherms, enthalpy of adsorption, and radial distribution functions, we revealed common mechanisms among the particularly efficient adsorbents as well as the ability of simulants to mimic them. The findings can help in selecting a suitable simulant compound to study CWA adsorption on MOFs and guide further synthesis of efficient MOFs for the capture of organophosphorus compounds.

Influence of fluid flows on electric double layers in evaporating colloidal sessile droplets.

A model is developed for describing the transport of charged colloidal particles in an evaporating sessile droplet on the electrified metal substrate in the presence of a solvent flow. The model takes into account the electric charge of colloidal particles and small ions produced by electrolytic dissociation of the active groups on the colloidal particles and solvent molecules. We employ a system of self-consistent Poisson and Nernst-Planck equations for electric potential and average concentrations of colloidal particles and ions with the appropriate boundary conditions. The fluid dynamics, temperature distribution and evaporation process are described with the Navier-Stokes equations, equations of heat conduction and vapor diffusion in air, respectively. The developed model is used to carry out a first-principles numerical simulation of charged silica colloidal particle transport in an evaporating aqueous droplet. We find that electric double layers can be destroyed by a sufficiently strong fluid flow.

Correction: Electrochemistry meets polymer physics: polymerized ionic liquids on an electrified electrode.

Correction for 'Electrochemistry meets polymer physics: polymerized ionic liquids on an electrified electrode' by Yury A. Budkov et al., Phys. Chem. Chem. Phys., 2022, DOI: 10.1039/d1cp04221a.

Electrochemistry meets polymer physics: polymerized ionic liquids on an electrified electrode.

Polymeric ionic liquids are emerging polyelectrolyte materials for modern electrochemical applications. In this paper, we propose a self-consistent field theory of a polymeric ionic liquid on a charged conductive electrode. Taking into account the conformational entropy of rather long polymerized cations within the Lifshitz theory and electrostatic and excluded volume interactions of ionic species within the mean-field approximation, we obtain a system of self-consistent field equations for the local electrostatic potential and average concentrations of monomeric units and counterions. We solve these equations in the linear approximation for the cases of a point-like charge and a flat infinite uniformly charged electrode immersed in a polymeric ionic liquid and derive analytical expressions for local ionic concentrations and electrostatic potential, and derive an analytical expression for the linear differential capacitance of the electric double layer. We also find a numerical solution to the self-consistent field equations for two types of boundary conditions for the local polymer concentration on the electrode, corresponding to the cases of the specific adsorption absence (indifferent surface) and strong short-range repulsion of the monomeric units near the charged surface (hard wall case). For both cases, we investigate the behavior of differential capacitance as a function of applied voltage for a pure polymeric ionic liquid and a polymeric ionic liquid dissolved in a polar organic solvent. We observe that the differential capacitance profile shape is strongly sensitive to the adopted boundary condition for the local polymer concentration on the electrode.

Force Fields for Molecular Modeling of Sarin and its Simulants: DMMP and DIMP.

Even three decades after signing the Chemical Weapons Convention, organophosphorus chemical warfare agents (CWAs), such as sarin, remain a threat. The development of novel methods for the detection of CWAs, protection from CWAs, and CWA decontamination motivates research on their physicochemical properties. Due to the extreme toxicity of sarin, most of the experimental studies are carried out using less toxic simulant compounds. In addition to experimental studies of sarin simulants, both sarin and simulants can be studied using in silico experiments-molecular simulations. The results of classical molecular modeling of the compounds and their agreement with experimental data rely on the force field used to describe the system. In recent years, there have been several force fields proposed for sarin and its most common simulant dimethyl methylphosphonate (DMMP). However, other simulants frequently used in experiments received less attention from the molecular simulation perspective, for example, to date, there is no force field and no simulation data for diisopropyl methylphosphonate (DIMP). Here, we compare the literature force fields for sarin and DMMP, focusing specifically on the vapor-liquid equilibrium for the pure species. We carried out Monte Carlo and molecular dynamics simulations using the existing literature force fields from which we predicted the liquid densities and vapor pressures developing the entire binodal curves. We compared the predictions to the experimental data and showed that the TraPPE-UA force field outperformed the other force fields. Thus, we extended TraPPE-UA for DIMP, utilized this force field in molecular simulations, and predicted the liquid densities and vapor pressures for a range of temperatures (binodal curve), which agreed well with the published experimental data. From the binodal, we calculated the critical properties of DIMP and demonstrated that these parameters can be used in the Peng-Robinson equation of state for this compound.

Molecular theory of the electrostatic collapse of dipolar polymer gels.

We develop a new quantitative molecular theory of liquid-phase dipolar polymer gels. We model monomer units of the polymer network as a couple of charged sites separated by a fluctuating distance. For the first time, within the random phase approximation, we have obtained an analytical expression for the electrostatic free energy of the dipolar gel. Depending on the coupling parameter of dipole-dipole interactions and the ratio of the dipole length to the subchain Kuhn length, we describe the gel collapse induced by electrostatic interactions in the good solvent regime as a first-order phase transition. This transition can be realized at reasonable physical parameters of the system (temperature, solvent dielectric constant, and dipole moment of monomer units). The obtained results could be potentially used in modern applications of stimuli-responsive polymer gels and microgels, such as drug delivery, nanoreactors, molecular uptake, coatings, superabsorbents, etc.

Coarse-grained model of glycosaminoglycans in aqueous salt solutions. A field-theoretical approach.

We present results of self-consistent field calculations of thermodynamic and structural properties of glycosaminoglycans (chondroitin sulfate, hyaluronic acid, and heparin) in aqueous solutions with added monovalent and divalent salts. A semiphenomenological coarse-grained model for semiflexible polyelectrolyte chains in solution is proposed. The coarse-grained model permits one to focus on the essential features of these systems and provides significant computational advantages with respect to more detailed models. Our approach relies on the method of Gaussian equivalent representation for the calculation of the partition functions in the form of functional integrals. This method provides reliable thermodynamic information for polyelectrolyte solutions over wide ranges of monomer concentrations. In the present work, we use the comparison and fitting of the experimental osmotic pressure with a theoretical equation of state within the Gaussian equivalent representation. The degrees of ionization, radii of gyration, persistence lengths, and structure factors of chondroitin sulfate, hyaluronic acid, and heparin in aqueous solutions with added monovalent and divalent salts are calculated and discussed.